With a range of heating capacities from 125 watts (435 BTU per hour) to 250 watts (852 BTU per hour) per foot length, these units can run from wall-to-wall or they can be mounted as discrete units in lengths of 28 inches to 10 feet.

The attractive 45º sloped top discourages use of heater as a shelf or a "step stool".

The unit is designed to mount on the wall at sill height (or lower) and can be positioned directly on the floor. The end of the unit can be positioned against adjacent sidewall if desired.

Standard finish is neutral grey. Also available in a spectrum of muted architectural colors in baked enamel finishes which are compatible with all interior decors.

Front cover is fabricated from 16-guage steel. While the back is constructed of 18-gauge. For service, all internal parts are accessible by removing cover Top of front cover engages with back; bottom of cover locks into place with screws.

Elements are long life metal sheath, aluminum fin type anchored to allow for quiet expansion and contraction.

Thermal limit switch with linear type (full length) sensing bulb provides constant protection against overheating from any cause. The switch will automatically reset when normal operating temperatures are restored.

Units are pre-wired. Units without optional controls are designed for either right or left hand entry for easy connection of supply wiring from bottom, rear or end, as well as multiple wiring of adjacent heaters from one entry point.

 For more information see Bulletin.